Setup guide

Mega 200VWR Router
Chapter 4: Configuration
112
Setting for Phone Port 2
Select the Same as Phone Port 1 box to set phone port 2 parameters to be identical to phone port 1.
Otherwise, please refer to descriptions in “Setting for Phone Port 1”.
User-defined Profiles
Note: A maximum of 8 user defined profiles are allowed.
Profile Name: A user-defined name to identify the profile.
Registrar Address(or Hostname): Indicate the VoIP SIP registrar’s IP address.
Registrar Port: Specify the port on which the VoIP SIP registrar will listen for register requests from VoIP
devices.
Expire: Expire time for the registration message sending.
User Domain/Realm: Set different domain names for the VoIP SIP proxy server.
Outbound Proxy Address: Indicate the VoIP SIP outbound proxy server IP address. This parameter is
very useful when your VoIP device is behind NAT.
Outbound Proxy Port: Specify the port on which the VoIP SIP outbound proxy will listen for messages.
Phone Number: This is the registration ID of the user as listed in the VoIP SIP registrar.
Authentication Username: Same as Phone Number.
Authentication Password: This is the password used for authentication to the VoIP SIP registrar.
Confirm Password: Re-enter the password for confirmation.