Setup guide

Mega 200VWR Router
Chapter 4: Configuration
111
Wizard
This section provides an easy setup process for your VoIP service. Phone port 1 and 2 can be registered
to different SIP Service Providers.
Voice QoS
DSCP Marking: Differentiated Services Code Point (DSCP), it is the first 6 bits in the ToS byte. DSCP
Marking allows users to assign specific application traffic to be executed in priority by the next Router on
the backbone network, based on the DSCP value.
Note: To make use of this functionality, ensure that all of the routers in the backbones network have the capability of
executing and checking DSCP through-out the entire QoS network.
Setting for Phone Port 1
SIP Service Provider: This section allows you to select your service provider. When the selection is
done, the parameters below are automatically displayed.
Select Profile: This allows you to select a desired VoIP provider whom is not already defined in the SIP
Service Provider list. You may manually setup the SIP accounts by entering VoIP SIP information into a
User-defined Profile. See below for details.
Phone Number: This is the registration ID of the user as listed in the VoIP SIP registrar
Authentication Username: If the username is same as the Phone Number, leave it blank. Otherwise,
fill in the space with your username given by your VoIP provider.
Authentication Password: This is the password used for authentication with the VoIP SIP registrar.