Setup guide

Mega 200VWR Router
Chapter 2: Installing the router
11
7
ADSL
Use the supplied RJ-11 (“telephone”) cable to connect this port
to the ADSL/telephone wall jack .
8
Antenna
Connect the detachable antenna to this port.
Cabling
One of the most common causes of ADSL problems is bad cabling or ADSL lines. Make sure that all
devices connected to your telephone line are turned on, and that all telephones used on the line are
connected via micro filters.. On the front of the product is a bank of LEDs. Once you have installed you
router, verify that the LAN Link and ADSL line LEDs are lit. If they are not, check that you are using the
proper/functional cables.
Ensure that all other devices connected to the same telephone line as your router (e.g. telephones, fax
machines, analogue modems) have a line filter connected between them and the wall socket, and ensure
that all line filters are correctly installed and the right way around. Missing line filters or line filters installed
the wrong way around can cause problems with your ADSL connection, including causing frequent
disconnections.