Setup guide

Mega 200VWR Router
Chapter 4: Configuration
104
Item Function Description
1 Connection Name VPN_L2TP
Given name of the L2TP connection
Dial out
select Dial out
2
Server IP Address (or
Hostname)
69.121.1.33 The Dialed server’s IP address.
Username username
3
Password 123456
The username & password that is required to
connect to the VPN server.
4 Auth.Type Chap(Auto) Keep this default value in most of the cases.
5 Idle Timeout 0
The connection will be disconnected when there
is no traffic over it for this predefined period of
time. If Idle time is set to 0, it means that the
connection will never time out.
IPSec
Select Enable to enhance your L2TP VPN
security..
Authentication MD5
Encryption 3DES
Perfect Forward
Secrecy
None
6
Pre-shared Key 12345678
Both sides of the tunnel should use the same
settings for these options