Setup guide

Mega 200VWR Router
Chapter 4: Configuration
102
Configuring L2TP VPN in the Office
The LAN IP address 192.168.1.200 will be assigned to the remote computer (client). Please make sure
this IP is not used on the Office LAN.
Item Function Description
1 Connection Name VPN_L2TP Given name of the L2TP connection
Dial in select Dial in
2
Private IP Address
Assigned to Dialing
User
192.168.1.200
The IP address to be assigned to the remote
client
Username username
3
Password 123456
The username & password that the remote client
will use to authenticate the connection.
4 Auth.Type Chap(Auto)
In most of the cases you should keep the default
value of authentication type for maximum
connection security.
5 Idle Timeout 0
The connection will be disconnected when there
is no traffic over it for this predefined period of
time. If Idle time is set to 0, it means that the
connection will never time out.
IPSec
Select Enable to enhance your L2TP VPN
security.
Authentication MD5
Encryption 3DES
Perfect Forward
Secrecy
None
6
Pre-shared Key 12345678
Both sides of the tunnel should use the same
settings for these options.
1
4
3
2
5
6