Specifications

Mega 100WR ADSL2+ Router - Manual
Page 48 of 54
4.7.2 LAN Isolation
LAN isolation allows you to disable the flow of packets between up to three user-defined LAN
groups. Your LAN group can consist of any combination of the following ports WLAN, USB,
and Ethernet. This allows you to segment your LAN and enables you to secure information in
private portions of your LAN from other publicly accessible LAN segments. I.e.: you could
prevent a user accessing your Wi-Fi interface from connecting to any device that is connected to
your Ethernet port. You will need to group the LAN interfaces into a LAN group under the
Advanced, LAN, LAN Configurations page, and then you can disable the traffic by selecting
the desired options shown in Figure 4-46.
Figure 4-46 : LAN Isolation