Specifications

Mega 100WR2 ADSL2+ Router - Manual
Page 73 of 81
4.7.1 IP Filters
Figure 4-65: IP Filters
The IP filters page, Figure 4-65, allows you to open selected IP ports to allow specific programs
access to/from the Internet. Many of the most popular applications and games are given in the
easy to use table, and setting your router up for these software applications has been made really
simple. If the application that you are using is not found on the rules list, you are able to
configure the required ports using the “User” function, and specifying your own filter rules. To
apply a filter rule, you need to select the required rule, and click on ADD > to move the selected
rule to the Applied Rules section.
4.7.2 LAN Isolation
LAN isolation allows you to disable the flow of packets between up to five user-defined LAN
groups. Your LAN group can consist of any combination of the following ports WLAN, USB,
Ethernet or any of the multiple SSID’s . This allows you to segment your LAN and enables you
to secure information in private portions of your LAN from other publicly accessible LAN
segments. I.e.: you could prevent a user accessing your Wi-Fi interface from connecting to any
device that is connected to your Ethernet port. You will need to group the LAN interfaces into a
LAN group under the Advanced, LAN, LAN Configurations page, and then you can disable
the traffic by selecting the desired options shown in Figure 4-66.