Specifications

Mega 100WR2 ADSL2+ Router - Manual
Page 72 of 81
Activate as Root This field must be selected for the root device in WDS hierarchy.
Only one WDS root device may exist in WDS network. This field is
not applicable for Crude mode.
WDS Privacy Selecting this field commands WDS manager to use a secured
connection between APs in the WDS network. Security settings
must be the same in all APs in the WDS network.
Note: WDS privacy is not supported in Crude mode.
Secret The 32-character alpha-numeric privacy key.
Auto Channel Selection Auto channel selection is not supported in the current version.
Auto Configuration Auto configuration is not supported in the current version.
Uplink Connection The BSS ID of the upper device in the WDS hierarchy. This uplink
cannot be configured if root is enabled.
Downlink Connection The BSS ID of the lower device in the WDS hierarchy connected to
this AP. Up to four downlinks can be configured.
4.7 Security
The security feature section allows users to configure the following as shown in Figure 4-64:
IP Filters
LAN Isolation
URL Filters
Figure 4-64: Security