Specifications

Mega 100WR2 ADSL2+ Router - Manual
Page 59 of 81
Destination IP The IP address of the traffic destination.
Mask The netmask of the destination. This field is required if the
destination IP has been entered.
Protocol The options are TCP, UDP, ICMP, Specify, and none. If you choose
Specify, you need to enter the protocol number in the box next to the
Protocol field.
This field cannot be configured alone; additional fields like IP,
Source MAC, and/or Ingress Interface should be configured first.
This field must be filled in if the source port or destination port has
been entered.
Source Port The source protocol port. You cannot configure this field without
first entering the protocol.
Destination Port The destination protocol port or port range. You cannot configure
this field without entering the protocol first.
Source MAC The MAC address of the traffic source.
Local Routing MAC This field is enabled only when Locally Generated is selected in the
Ingress Interface field. The mark for DNS traffic generated by
different applications are described below:
• Dynamic DNS: 0xE1
• Dynamic Proxy: 0xE2
• Web Server: 0xE3
• MSNTP: 0xE4
• DHCP Server: 0xE5
• IPtables Utility: 0xE6
• PPP Deamon: 0xE7
• IP Route: 0xE8
• ATM Library: 0xE9
• NET Tools: 0xEA
• RIP: 0xEB
• RIP v2: 0xEC
• UPNP: 0xEE