Specifications

Mega 100WR2 ADSL2+ Router - Manual
Page 58 of 81
4.5.27 Policy Routing Configuration
The Policy Routing Configuration page shown in Figure 4-48 is accessed by selecting Policy
Routing Configuration on the Advanced home page under QoS. This page enables you to
configure policy routing and QoS. The policy routing configuration is discussed as follows. The
QoS configuration is discussed in ‘‘Ingress Payload Database Configuration’’.
Figure 4-48: Policy Routing Configuration
Field Definition/ Description
Ingress Interface The incoming traffic interface for a Policy Routing rule. Options are
LAN interfaces, WAN interfaces, Locally generated (traffic), and not
applicable. Examples of Locally generated traffic are: voice packets,
packets generated by applications such as DNS, DHCP, etc.
Destination Interface The outgoing traffic interfaces for a Policy Routing rule. Selections
include LAN Interfaces and WAN interfaces.
DiffServ Code Point The DiffServ Code Point (DSCP) field value should be between 1
and 255. This field cannot be configured alone; additional fields like
IP, Source MAC, and/or Ingress Interface should be configured first.
Class of Service The selections are (in the order of priority): CoS1, CoS2, CoS3,
CoS4, CoS5, CoS6, and N/A.
Source IP The IP address of the traffic source.
Mask The source IP netmask. This field is required if the source IP has
been entered.