Specifications

Mega 100WR2 ADSL2+ Router - Manual
Page 55 of 81
100Kbps but instead all 300Kbps is transmitted. The side effect is
that a misconfigured stream can potentially take all bandwidth.
PRIOWRR This is a priority based weighted round robin algorithm operating on
CoS2-CoS6. CoS1 queues have the highest priority and are not
controlled by the WRR algorithm.
Of the three shaping algorithms available on the Shaper Configuration page, only one can be
enabled at a time. An example of each configuration is given as follows.
Example 1: HTB Queue Discipline Enabled
In the example shown in Figure 4-45, HTB Queue Discipline is enabled. The PPPoE1
connection has a total of 300 kbits of bandwidth, of which 100 kbits is given to CoS1 and
another 100 kbits is given to CoS2. When there are no CoS1 or CoS2 packets, CoS6 packets
have the whole 300 kbits of bandwidth.
Figure 4-45: HTB Queue Discipline enabled