Specifications

Mega 100WR2 ADSL2+ Router - Manual
Page 22 of 81
Figure 4-12: Diagnostics Test Result Screen
After running the Diagnostic Test, the screen will indicate which tests pass or fail. See Figure 4-
12.
4.4.1 Ping Test
Once you have your router configured, ensure you can ping the network. Type the target
address that you want to ping. If your PC is connected to the ADSL Router via the
default DHCP configuration, you should be able to ping the network address 10.0.0.2. If
your ISP has provided their server address, try to ping the address. If the pings for both
the WAN and the LAN sides are complete and you have the proper protocols configured,
you should be able to surf the Internet. By default when you select ping test, the Mega
100WR2 will ping 3 times. The router shown in Figure 4-13 passes a Ping test; this
basically means that the TCP/IP protocol is configured correctly. If the first Ping test
does not pass, the TCP/IP protocol is not loaded for some reason; you should restart your
router.