Specifications

Mega 100WR2 ADSL2+ Router - Manual
Page 19 of 81
4.2 Quick Start
If you wish to change your current configuration, click on the ‘Quick Start’ link. Figure 4-9
will appear. Your login information can be altered here is required.
Figure 4-9: Quick Start Page
4.3 LAN / DHCP Configuration
On one side of your Mega 100WR2 Router, are your Local Area Network (LAN) connections.
This is where you plug in your local computers to the ADSL Router. The physical connection to
the LAN side of your router is by means of the Wi-Fi, USB and Ethernet ports. The ADSL
Router is configured by default to automatically provide all of the PC's on your network with
Internet addresses (DHCP).
To enable or disable DHCP, click Basic, and select LAN Configuration. The Start IP Address is
where the DHCP server starts issuing IP addresses. This value should be greater than the ADSL
Router IP address value. For example if the ADSL Router IP address is 10.0.0.2 (default) than
the starting IP address should be 10.0.0.3 (or higher).