Operator`s manual

Example certification label (Canada vehicles)
;
Vehicle Identification Number (VIN)
=
Paintwork code
Vehicle Identification Number (VIN)
The Vehicle Identification Number (VIN)
can be found in the following locations:
R
on the certification label on the driver’s
door B‑pillar (Y page 202)
R
on the rear right on the cargo
compartment floor (Y page 203)
R
in the lower edge of the windshield
(Y page 202)
X
Open the cargo compartment.
X
Fold back the carpet.
:
VIN (on the cargo compartment floor)
Engine number
The engine number is engraved into the
engine block. For more information,
contact any authorized smart center.
i
When ordering parts, please specify
vehicle identification and engine
number.
Vehicle specification (model pure)
The quoted data apply only to the standard
vehicle. Contact an authorized smart
center for the corresponding data of all
special bodies and special equipment.
Engine (model pure)
Engine, type
132
Mode of operation
4‑stroke engine,
gasoline injection
No. of cylinders
3
Valves per
cylinder
4
Bore
2.83 in (72.00 mm)
Stroke
3.22 in (81.80 mm)
Total piston
displacement
61.0 cu in (999 cm
3
)
Compression ratio
10.0:1
Output acc. to
SAE J 1349
70 hp/5 800 rpm
(52 kW/5 800 rpm)
Maximum torque
acc. to SAE J 1349
68 lb-ft/4 500 rpm
(92 Nm/4 500 rpm)
Maximum engine
speed
6 400 rpm
Firing order
1-2-3
Poly‑V‑belt
802 mm
Vehicle specification (model pure)
203
>> Technical data.
Z