User manual

MultiMonitor
Fig.1 iMultiView Interface
1.2.1 Enumerate
Start iMultiView and press the “Enumerate” button, iMultiView will start
a search for all the iCAMView units on the network and list them in the
main window.
Once detected, the following will show in the main window:
This shows that iCAMView is currently online and can transmit video.
This shows that iCAMView is online but image can not be transmitted. Check and
see if the UDP port setting is correct.
This shows that iCAMView is off-line
1.2.2 Add Device
6