User manual

Chapter 3: Web Interface

3.1. Introduction

iCAMView is designed to work without having to install any software. All the

necessary functions are built-into the unit.

1. Once you have finished the hardware setup shown in Chapter 2, note down the IP

address shown on the LCD.

2. On a PC (located in the same LAN), open a Web Brower (eg.: Internet Explorer,

Netscape, Mozilla Firefox or Opera).

3. Enter the IP Address as shown on the iCAMView LCD display and press ENTER.

Fig.6 Enter iCAMView IP address

4. iCAMView main screen will appear. Click on ActiveX or Java VM icon to view.

Fig.7 iCAMView main screen

iCAMView - user manual -5-