User manual

Chapter 2: Hardware Setup
Chapter 2: Hardware Installation
The following details the hardware installation procedure for iCAMView IP camera.
Step 1:
Connect the PC camera into the USB
port of iCAMView.
Step 2:
Connect the iCAMView to LAN by
using the Ethernet UTP port.
Step 3:
Connect DC power adapter output into
iCAMView socket, and plug the DC
power input into the wall socket
Step 4:
Wait a moment and the LCD will
display the IP Address, Subnet and
Gateway. Use a Browser to log into
iCAMView Web Interface
The
icon on the LCD shows that
a USB camera is connected.
The LCD display shows that two USB
cameras are attached to the
iCAMView.
iCAMView - user manual -4-