User manual

Chapter 4: View Images Using PDA / PPC / mobile

iCAMView supports image viewing from a GRPS / WiFi enabled PDA / PPC /

Symbian mobile device. To view the images;

a. Make sure that the PDA / PPC / Mobile unit is connected to LAN or Internet.

b. Enter http://xxx.xxx.xxx.xxx/image.cgi in the web address (where xxx is

either the LAN IP, WAN IP address or iCAMView Domain Name)

c. The following login page will appear. Enter the Login Name and Login

Password if applicable. Otherwise, click Apply to proceed.

d. The following Camera Selection will appear. Click on either Camera A or

Camera B.

iCAMView - user manual -51-