User manual

Chapter 1: Introduction
Once iCAMView is installed, the user can check any of the connected PC cameras
using a standard web browser. The user can monitor and control these cameras
simply by entering the IP address shown on the LCD into a Browser.
Fig.1 iCAMView Network Diagram
1.3. Package Contents
The package contains the following items;
1. iCAMView PRO server.
2. USB Camera (where applicable)
3. Quick Installation Guide.
4. Utility CD, containing,
a. iCAMView Utility: to configure IP address, update the firmware, etc.
b. iMultiView: to monitor multiple ICAMView cameras.
c. Time Server: Time adjustment utility.
d. Adobe Acrobat 5.0 Reader.
e. iCAMView User Manual, and
f. Driver for USB Camera.
5. Slim Ethernet cable.
6. Power adaptor.
iCAMView - user manual -2-