User manual

Chapter 3: Web Interface
Fig.50 Add Time Server dialog box
Time Zone (Relative to GMT)
Select the appropriate time zone. Click Apply to save changes.
System Time (yyyy/mm/dd hh:mm:ss)
This section is to manually set iCAMView System Time. The format is
pre-determined to: yyyy/mm/dd hh:mm:ss (in 24hr format). Click Manual
Adjust to save the changes.
ii. LED Settings
Fig.51 LED Settings
LED function
This function is not applicable.
iii. SNMP Settings
Fig.52 SNMP Settings
SNMP
Choose to enable or disable this feature.
Community
Assign a unique Community name for this unit that is identifiable in a Network
Management System (NMS).
SNMP Version
Select the SNMP version supported by the system.
System Name
This is to give iCAMView a name identifiable in a SNMP network.
System Contact
This is to give the Administrator an identity in the SNMP network.
System Location
This is to set iCAMView SNMP location.
iCAMView - user manual -43-