User manual

Chapter 1: Introduction

1.1. Features

iCAMView is a compact stand-alone web-server capable of remote video

surveillance. It can be accessed from anywhere in the world via a standard browser

by entering the IP Address (or Domain Name), account and password. This allows

iCAMView to stream video images directly to the Internet without having to go through

a computer.

iCAMView features a Windows-based software that allows the user to archive

streaming video directly to the viewer’s hard-drive. The same software also allows the

user to monitor multiple cameras on one screen.

Features:

• Support Wireless USB dongle (using chipset: Atheroz / Ralink).

• Support USB Hub.

• Support USB Flash disk (FAT32) for local storage.

• Support TWO USB PC Camera (VIMICRO ZC0301 Plus processor built-in).

• Support Pan/Tilt and Infrared USB PC Camera (sold separately).

• Support Environment sensor (NetFeeler Lite), wireless smoke & door sensor

(sold separately).

• LCD display shows; IP address, Subnet Mask and Gateway.

• Built-in Web Server with 32-Bit RISC CPU.

• 10/100Mbps Fast Ethernet Network Access.

• Support Java-Enabled Web Browser.

• Up to 30 Remote Viewers per camera.

• Create up to 8 User Access Accounts and Passwords.

• Network Protocol: HTTP, TCP/IP, UDP, SMTP, PPPoE, Dynamic DNS, DNS

Client, SNTP, BOOTP, DHCP, FTP, SNMP.

• Resolution available: 640x480 (VGA), 352x288 (CIF), 320x240 (QVGA),

176x144 (QCIF), 160x120 (QQVGA).

• Frame Rate: Up to 15fps in 640x480, Up to 20fps in 320 x 240.

• Motion JPEG video stream.

Hardware Specifications:

• 5.3VDC 1A Maximum

• Operating Temperature: 0°C ~ 60°C; Operating Humidity: 10% ~ 90%

• Dimensions: 48mm x 63mm x 21mm

• Weight: 75g

• For Indoor Use. Protective housing required for outdoor use.

1.2. iCAMView as a Remote Surveillance System

iCAMView - user manual -1-