User manual

Chapter 3: Web Interface
Fig.24 iCAMView Wireless Setup
Connect to Wireless AP
When a compatible Wireless USB dongle is connected, select Yes and click
Search Wireless AP button to have it search for nearby Access Points (AP).
Once detected all available AP will be displayed on the table to the right.
Select the preferred AP and click << button to add it to the SSID field.
Fig.25 Wireless AP detected and preferred AP selected
Authentication
Select either; Open System or Shared Key. Check the AP for the appropriate
authentication method in use.
WEP Encryption
Select from either; none, 64-bit key or 128-bit key. Check the AP for the
appropriate encryption used.
WEP Key (10 or 26 hex digits)
Key in the password used.
3.2.3.6 Account Settings
This webpage allows you to set up to Eight (8) different user accounts with different
access permission level to iCAMView. This section can only be edited by an
administrator.
i. User Account
iCAMView - user manual -27-