User manual

Chapter 3: Web Interface
Fig.18 iCAMView NetFeeler Lite Settings
i. NetFeeler Lite
Temperature High / Low
Select the maximum / minimum temperature range. If the temperature crosses
these figures, NetFeeler Lite will send out an alarm.
Humidity High / Low
Select the maximum / minimum humidity range. If the humidity level crosses
these figures, NetFeeler Lite will send out an alarm.
3.2.3.4 Network
This option determines iCAMView Network settings.
i. IP Address
By default, the IP address acquisition is set to using DHCP.
Fig.19 iCAMView IP Address Settings
IP Address
This determines iCAMView LAN IP address.
Subnet Mask
iCAMView - user manual -20-