User manual

Chapter 3: Web Interface
Fig.16 iCAMView Patrol Settings
i. Patrol Setting
This section allows the user to define hotspots, required patrol boundary, and
see where the current camera position.
Fig.17 iCAMView Patrol Setting / Controls
User
defined
Pan Tilt
boundar
y
Maximum boundary (x,y)
of the Pan Tilt camera
Click to select which
camera to control.
User defined
hot spot bubble.
Current
camera
position
and view
area.
Show ful
Pan Tilt
range.
HotSpot Settings
This part shows the hotspot coordinates and the Administrator can give each
location a name. Click and hold on the Hotspot bubble in the above patrol
control to re-define the coordinates.
iCAMView - user manual -18-