User manual

Chapter 3: Web Interface
3.2.2 Information
The Information tab contains the following subsections;
3.2.2.1 System Status,
3.2.2.2 Current Connections, and
3.2.2.3 Event Log.
3.2.2.4 NetFeeler Lite
3.2.2.1 System Status
This webpage displays all the information relating to iCAMView. This page is
viewable by viewers of all permission levels.
Fig.9 iCAMView System Status page
i. System Information
This section shows general hardware information such as the Hardware and
Firmware Version, the serial number, current / local System Time, the system
name, contact, location and uptime.
ii. Network Status
This section shows the network information. The MAC Address is unique to
each iCAMView system.
iii. Camera A / B Information
This section shows the Vendor ID, Product ID and Sensor type used by the
camera. These information are essential in determining if the 3
rd
party USB
camera is iCAMView compatible. Check with your vendor for compatibility.
iCAMView - user manual -12-