User manual
MultiMonitor
Manually adds iCAMView camera to be monitored.
a. Access by iCAMView Address
Host Address:
Enter either the WEB address (without the www eg:
iCAMView.myddns.com) or LAN IP of iCAMView (eg: 192.168.0.38)
Remote Port:
This is iCAMView UDP port. This should correspond to Basic Settings
Network Port Number …
b. Access by iMage Server
iMage Server Address:
Enter the iMage Server Address if available.
iMage Server Port:
Enter the iMage Server UDP port, if necessary.
iCAMView Name:
Enter the assigned login name for this iCAMView.
iCAMView Password:
Enter the assigned password for this iCAMView.
1.2.3 Delete Device
7