User manual

Manual Mode

Select the desired fixture or fixtures from 1 to 16 adjust the faders to represent the desired look if the fixtures has more than 5

faders in the profile press Page B to activate faders 6 to 10

Using Faders

Using Presets

Select the desired fixture or fixtures from 1 to16 select the desired color from the scenes

or chase from the Chase options

Save Scene

The Q-loader can save up to 16 scenes into 2 pages.

1. Hold the Edit/Rec Button for 3 second until the indicator turns on.

2. Select the desired fixtures and adjust the scene as desired with the faders.

3. Press Edit/Rec to confirm the effect.

4. Press the Scene from 1 to 8, page A or page B that the scene will be stored in indicator flashes.

5. Hold the Edit/Rec Button for 3 second to exit.

Note: If there is a existing scene in the selected button, the new scene will overwrite the old.

Save Chase

The Q-loader can save up to 16 Chases into 2 pages. Each Chase can be a maximum of 200 steps for each chase.

1. Hold the Edit/Rec Button for 3 second until the indicator turns on.

2. Select the desired Chase button from 1 to 8, page A or page B

3. Select the desired fixtures and adjust the scene as desired with the faders.

4. Press Edit/Rec to confirm the step.

5. Repeat steps 3 to 4 up to 200 times max.

6. Hold the Edit/Rec Button for 3 second to exit.

Note: The Display will list the number if steps that have been recorded.

Insert Step in Chase

1. Hold the Edit/Rec Button for 3 second until the indicator turns on.

2. Select the desired Chase button .

3. Press Insert/Tap The indicator light will turn on.

4. Press the Or to select the location in which to insert step.

5. Select the desired fixtures and adjust the scene as desired with the faders.

6. Press Edit/Rec to confirm the step.

7. Repeat steps 4 to 6 to insert another step.

8. Press Insert /Tap again to turn off indicator.

9. Hold the Edit/Rec Button for 3 second to exit.

Delete Step in Chase

1. Hold the Edit/Rec Button for 3 second until the indicator turns on.

2. Select the desired Chase button .

3. Press the Or to select the step to delete.

4. Press Del/Clr to delete step indicator lights will flash.

5. Repeat steps 3 to 4 to delete another step.

6. Hold the Edit/Rec Button for 3 second to exit.

Note: The Display will show the number of the steps that you are deleting.