SDS

MEECO Manufacturing Company, Inc.
SAFETY DATA SHEET
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Name
Product Code
MANUFACTURER:
Contact Information:
MEECO MFG CO INC
Telephone: [phone]
9100 15th Pl S, Ste E
Fax: [phone]
Seattle, WA 98108
Print Date:
09/02/15
2. HAZARDS INDENTIFICATION
CLASSIFICATION:
Category 1
LABELING:
3. COMPOSITION/HAZARDOUS INGREDIENTS
Ingredient:
CAS #
Percent
Exposure Limits
Fixed Carbon 7440-04-40 15 - 30
Soda Bicarbonate 144-55-8 15 - 30
Copper Chloride 7758-99-8 5 - 20
Bentonite Clay 1302-78-9 5 - 20
Silicon Dioxide 14808-60-7 35 - 50
4. FIRST AID MEASURES
Eyes
Skin
Irrigate with flowing water immediately and continuously for 15
minutes, lifting the upper and lower eyelids occasionally. Consult
physician.
Powder Soot Remover
16, 16-3, 17
Wash thoroughly with soap and water.
Carcinogenicity, Category 2
Eye irritation, Category 2
Skin irritation, Category 3
Target organ toxicity (repeated),
Symbol: Health Hazard
Signal word: Warning
Hazard statement: Suspected of causing cancer.
Precautionary statement: Excessive inhalation of dust will increase
the risk of silcosis. Some medical studies have concluded that there
is sufficient evidence in humans for the carcinogenicity of inhaled
crystalline silica in the form of quartz or cristobalite from
occupational sources. Avoid prolonged exposure to dust. Provide
adequate ventilation and use suitable respirators if dust conditions
warrant.
OSHA PEL = 10mg/m
3
ACGIH TLV = 15mg/m
3
OSHA PEL = 15mg/m
3
(Total Dust)
ACGIH TLV = Not Developed
OSHA PEL = 1mg/m
3
ACGIH TLV = 1mg/m
3
OSHA PEL = .05mg/m
3
ACGIH TLV = .05mg/m
3
OSHA PEL = 5mg/m
3
ACGIH TLV = 10mg/m
3
Safety Data Sheet Powder Soot Remover Page 1