Instruction Manual

EN
31
• Do not expose batteries or power tools to
naked ames or heat. Batteries can
explode when exposed to naked ames or
temperatures higher than 130°C.
• Follow the instructions for charging and
charge the battery only at the
temperature indicated in the instructions.
Incorrect charging or charging outside the
given temperature range can damage the
battery and cause a re.
SERVICE
• Power tools must only be serviced by
qualied personnel using identical spare
parts. This will ensure that the power tool
remains safe to use.
• Never attempt to repair damaged
batteries. The battery must only be
serviced by the manufacturer or at an
authorised service centre.
SAFETY INSTRUCTIONS FOR
CORDLESS SCREWDRIVER
• Hold the power tool by the insulated grips
when working in areas where the tool
could come into contact with concealed
electrical cables or its own power cord.
Contact with a live cable will cause the
metal parts on the power tool to also
become live – risk of electric shock.
SAFETY INSTRUCTIONS FOR USE OF
LONG DRILLS
• Never work with a speed higher than the
rated speed for the drill. At higher speed
there is a risk that a freely rotating drill
without contact with the workpiece can
bend and cause personal injury.
• Always start drilling at low speed and with
the tip of the drill in contact with the
workpiece. At higher speed there is a risk
that a freely rotating drill without contact
with the workpiece can bend and cause
personal injury.
• Only apply pressure in line with the drill.
Do not press too hard. The drill can bend,
which can cause it to break, or that you
loose control of the tool, and result in
personal injury.
ACCESSORIES
/
ATTACHMENTS
• Only use the accessories and attachments
specied in the instructions and which are
compatible with the product.
SAFETY INSTRUCTIONS FOR
BATTERY CHARGER
• This product can be used by children from
8 years of age and by persons with
physical, sensorial or mental disabilities,
or persons who lack experience or
knowledge, if they are supervised or
receive instructions concerning the safe
use of the product and understand the
risks involved. Keep children under
supervision to make sure they do not play
with the tool. Do not allow children to
clean or maintain the tool without
supervision.
Symbols
The following symbols can be of importance
for how you should use your power tool. Make
sure you understand the symbols and their
signicance.
SYMBOLS
Read the instructions.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
Always wear ear protection!
The declared values for vibration and noise, which
have been measured according to a standardised