Instruction Manual

EN
80
– Feedback of test result
– Device information
FIG. 43
FEEDBACK OF TEST RESULT
1. In the case of impossible test results or other problems using the
product the test results can be sent to the manufacturer with the
feedback function. Select the item Feedback The Test Result.
The following is shown on the display:
– Automatic recording is ready, perform the related functions
that require feedback.
– After the execution, disconnect the car, connect to the
computer via USB.
FIG. 44
– Press the ESC button several times to return to the main
menu.
Example
Fault when registering change of battery: Mark the option Registry
Battery Change and register the battery change again (this step is very
important).
NOTE:
The product must be connected to the vehicle for the above step.
2. Disconnect the product from the vehicle when the battery change
is registered.
3. Connect the product to a computer with a USB cable, transfer
the data and create a feedback le (an upgrade le must rst be
downloaded from the AUTOPHIX website to the computer).
FIG. 45