Instruction Manual

SPECIAL FUNCTIONS

Select Oil Reset. Special functions include resetting after an oil change

and BMS, EPB and ETC resetting.

FIG. 17

Example

The following is an example of resetting after an oil change and ETC

resetting.

Oil Reset

Select Oil Reset. Follow the steps on the display images.

– Resetting the Service Reminder

– Reset the SRI for CEM

– Reset the SRI for DIM

– Ignition On

– The SRL (Service Reminder Lamp) Resetting Finished

FIG. 18

ETC reset

1. Select ETC reset. The conditions below must be met to match the

throttle unit and accelerator pedal.

• Ignition on, engine not started.

• No fault codes in the engine control unit.

• All power consumers switched o.

• Coolant temperature higher than 85°C.

• Accelerator pedal fully released.

FIG. 19