Instruction Manual

EN
69
7. Button to cancel selection/step, or to step back in the menus
FIG. 1
ABOUT THE PRODUCT
Fault code reader for Volvo models. A useful diagnostic tool with support
for on-board diagnostics 2 (OBD-II). Reads vehicle information, resets
fault codes and has smart diagnostic tools and special functions to
turn o warning indicators for oil pressure, parking brake (EPB), battery
(BMS) and electronic throttle control (ETC). Supplied in protective case
with carry strap.
ABOUT FAULT CODES
The OBD II system stores fault codes (Diagnostic Trouble Codes, DTC) in
the vehicle’s computer system. The fault codes provide information on the
type of fault and where and in which conditions the fault occurred, which
simplies fault tracing and correction. The OBD II codes consist of a
5 character alphanumeric string. The rst character is a letter that indicates
which control system has caused the fault. The following four characters
are digits that provide supplementary information on where and in which
conditions the fault code was generated. See example below.
USE
CONNECTION
1. Activate ignition.
2. Localise the 16-pin diagnostics connector (DLC).
3. Connect the fault code reader.