Instruction Manual

SAFETY INSTRUCTIONS

• Carry out testing and inspection of vehicles only in a safe working

environment and in safe conditions.

• Never attempt to use or read the product while manoeuvring the

vehicle – risk of fatal or serious personal injury.

• Wear safety glasses that comply with the requirements of ANSI.

• Work outdoors or in a well ventilated area – risk of personal and/

or fatal injury from inhalation of exhaust fumes.

• Apply the parking brake. If the vehicle has an automatic gearbox

put it in P (parking), if it has a manual gearbox put it in neutral.

• Work outdoors or in a well ventilated area – risk of personal

and/or fatal injury from inhalation of exhaust fumes.

• Pay attention to moving parts (fan, auxiliary drive etc.) when

the engine is running – risk of serious personal injury.

• Internal combustion engines get very hot when they are switched

on – risk of burn injury.

• The engine and ignition must be switched o when connecting or

disconnecting the test equipment, otherwise the test equipment

or electronics in the vehicle can be damaged. Switch o

the ignition before connecting the fault code reader to,

or disconnecting it from, the Data Link Connector (DLC).

• Fuel and battery fumes are highly ammable. Keep sparks,

hot objects and naked ames away from the battery, fuel system

and fuel fumes to minimise the risk of explosion. Do not smoke

near the vehicle when testing is in progress.