Manualshelf

User Manual

ManualsBrandsMEE audio ManualsAudio MonitoringM6 PRO 2nd Generation Universal-Fit Noise-Isolating Musician's In-Ear Monitors with Detachable Cables
12345678910
5
CONFIGURING FOR YOUR EARS:
Comply
TM
MEMORY FOAM EARTIPS
Inserting the Premium Earphone Tip
Install
Comply
TM
eartips as shown on page 4.
1. Roll the tip into
a thin, round
cylinder.
2. Pull back and up on
the ear to open the
canal. Gently insert the
entire tip into the ear.
3. Hold the tip in
place until it
expands.
Clean earphone nozzle of any debris. Securely
install the new
Comply
TM
Premium Earphone
Tip onto clean, dry nozzle. Recommended
replacement is after 3 months of regular use.
For replacement tips, go to complyfoam.com
The
Comply
TM
eartip size included with the
M6 PRO is the T200 Medium.
Changing the Premium Earphone Tip
Remove old
Comply
TM
foam tip by firmly grasping the entire tip, including
the plastic inner core, from the back of the tip (close to the earpiece).
Firmly pull the tip off the earphone nozzle, rotating slightly or pulling
at an angle if necessary to overcome friction.