UNIVERSAL-FIT NOISE-ISOLATING MUSICIAN’S IN-EAR MONITORS model: M6PRO USER MANUAL BEFORE FIRST USE WATCH THE HOW TO WEAR FIT VIDEO at: goo.gl/3fdemF Please read this manual in its entirety to ensure best fit and sound.
PACKAGE CONTENTS NOISE-ISOLATING MUSICIAN’S IN-EAR MONITORS M6 PRO In-Ear Monitors ¼” (6.
FIRST USE: ATTACHING THE EARPIECES The M6 PRO includes two detachable, interchangeable cables 1. STEREO AUDIO CABLE Engineered for maximum performance, the stereo cable features a reinforced plug and internal braiding for strength and tangle-resistance. A gold-plated ¼” (6.3mm) stereo adapter is included to ensure compatibility with a wide range of gear. 2.
FIRST USE: ATTACHING THE EARPIECES (Continued) notch groove 3 1.1 Attach the cable by lining up the notches on the connector with the matching grooves on the earpieces as shown. Push connectors in until they fit securely. 1.2 To detach the cable, grasp the earpiece and cable connector firmly, and pull straight apart without twisting.
CONFIGURING FOR YOUR EARS: EARTIPS Multiple sets of eartips are included to ensure you get the best fit with your headphones. We recommend trying all of the included eartips. If you experience tinny sound or a lack of bass, try different eartips. The correct eartip for your ear will: • Allow the earphone to fit flush in the ear • Seal with your ear canal and reduce outside noise when inserted • Provide good bass response 1 2 3 4 Install eartips as shown.
CONFIGURING FOR YOUR EARS: Comply MEMORY FOAM EARTIPS TM Inserting the Premium Earphone Tip Install Comply eartips as shown on page 4. TM 1. Roll the tip into a thin, round cylinder. 2. Pull back and up on the ear to open the canal. Gently insert the entire tip into the ear. Changing the 3. Hold the tip in place until it expands. Premium Earphone Tip Remove old Comply foam tip by firmly grasping the entire tip, including the plastic inner core, from the back of the tip (close to the earpiece).
CONFIGURING FOR YOUR EARS: MEMORY WIRE M6 PRO earphones feature an over-the-ear fit with a flexible “memory wire” section located near the earpieces. Using the memory wire correctly will ensure the most comfortable and secure fit. For a video demonstration of how to wear your M6 PRO, please visit: goo.gl/3fdemF or scan the QR code. 1.1 Identify the right and left earpieces. They are not interchangeable. 1.2 Straighten the memory wire and put each earpiece in the corresponding ear.
CONFIGURING FOR YOUR EARS: MEMORY WIRE (Continued) 2.1 Adjust earpiece until it fits flush in your ear and the eartip seals in the ear canal. 2.2 Holding the earpiece in place, bend the memory wire around your ear to achieve a conforming fit.
CONFIGURING FOR YOUR EARS: MEMORY WIRE (Continued) 3 While pulling the cable gently with one hand, squeeze the memory wire behind your ear with the other hand until the fit is tight and secure continue to next page 8
CONFIGURING FOR YOUR EARS: MEMORY WIRE (Continued) cable cinch slide the cable cinch up 4.1 Tighten the sliding cable cinch to fix the earphones in place for the most secure fit shirt clip holds cable in place 4.
CONFIGURING FOR YOUR EARS: MEMORY WIRE (Continued) 5.1 Stereo cable can be worn behind back for greater freedom of movement 5.
CONFIGURING FOR YOUR EARS: SUBSEQUENT USE After first use, the memory wire will retain its approximate shape for easier future installation. pull over ear 1 11 To put the earphones on, pull the earpieces over from behind the ear, placing the memory wire over the ear.
CONFIGURING FOR YOUR EARS: SUBSEQUENT USE (Continued) 2.1 Insert the earpieces into your ears and adjust until a seal is achieved. 2.2 Squeeze the memory wire behind your ear until the fit is tight and secure. Use the cable cinch and shirt clip to control cable movement. Note: When removing and re-inserting the earphones, avoid getting sweat in the nozzle as this may lead to a temporary reduction/loss of sound.
MICROPHONE & REMOTE USE The headset cable includes an inline remote, microphone, and volume control.
CARE AND CLEANING • Do not remove from ears or unplug by pulling on the cable. Always grasp the plastic part of the plug or earpieces • If necessary, clean the earphones with a small amount of hydrogen peroxide on a cotton swab. Swab only the outside of the earphone. Eartips can be removed and rinsed under running water or in hydrogen peroxide. Allow earphones and eartips to dry completely before resuming use.
MEE audio and its logo are registered trademarks of S2E, Inc. All rights reserved. iPhone®, iPad®, iPod® are a registered trademark of Apple Inc. Android™ is a registered trademark of Google Inc. © 2014 Hearing Components. Comply is a trademark of Hearing Components.
www.MEEaudio.com support@MEEaudio.
