USER MANUAL Bluetooth Wireless headphone system for tv ® Includes Bluetooth Wireless audio Transmitter and Wireless Neckband In-Ear Headphones www.MEEaudio.com/T1N1 CONNECT SUPPORT GUIDE Visit MEEaudio.com/ConnectHelp for easy-to-follow setup videos, full user manuals, and the latest troubleshooting information.
Bluetooth Wireless headphone system for tv ® FOR ADDITIONAL SUPPORT • View and download complete user manuals for Connect transmitter and N1 headphones at MEEaudio.com/Support • View our Connect Support Guide at MEEaudio.com/ConnectHelp for easy-to-follow setup videos and troubleshooting information • Contact us at support@MEEaudio.
PACKAGE CONTENTS CONNECT Bluetooth Transmitter 3.5mm to RCA adapter N1 Bluetooth Stereo Headphones TOSLINK digital optical S/PDIF audio cable 3.
1 PLUG USB POWER CABLE INTO TRANSMITTER plug into AC adapter, TV, or computer USB port CONNECT 2 hrs N1 CHARGE HEADPHONES
2 POWER ON TRANSMITTER A OF F ON A OFF ON A HOLD OFF ON 3 seconds POWER ON HEADPHONES
3 CONNECTION IS ESTABLISHED B solid blue light on transmitter indicates connection IF NO SOLID BLUE LIGHT, PERFORM PAIRING PROCEDURE IN STEP 6
4. choose an audio cable supported by your tv OPTICAL S/PDIF [DIGITAL] remove protective caps plug the optical cable into TV’s digital audio output AUDIO OUPUT R A OFF L OPTICAL ON AUDIO OUPUT OPTICAL IF TV AUDIO PLAYS FROM HEADPHONE, SETUP IS COMPLETE. PROCEED TO STEP 5. NO SOUND? CHECK TV SETTINGS MENU.
4. choose an audio cable supported by your tv RCA A AUDIO OUPUT OFF ON R L OPTICAL AUDIO OUTPUT plug the stereo cable into RCA adapter and connect to TV’s red/white RCA jacks labeled “AUDIO OUT” R L IF TV AUDIO PLAYS FROM HEADPHONE, SETUP IS COMPLETE. PROCEED TO STEP 5. NO SOUND? CHECK TV SETTINGS MENU.
4. choose an audio cable supported by your tv 3.
5 ADJUSTING HEADPHONE VOLUME TAP to increase volume TAP to decrease volume WHEN FINISHED, POWER OFF HEADPHONES UNTIL NEXT USE HOLD 3 seconds POWER OFF HEADPHONES
6 ADDITIONAL INFORMATION N1 PRODUCT OVERVIEW Volume up / skip track button Micro-USB charging port Multifunction button Volume down / previous track button Status indicator light
6 ADDITIONAL INFORMATION STEP 1: SELECTING EARTIPS Select the eartips with the best sound and comfort for your ears. If your music sounds tinny or lacks bass, try different eartips.
6 ADDITIONAL INFORMATION STEP 2: WEARING THE N1 Wear neckband so that controls are facing upwards and place each earpiece in the corresponding ear.
6 ADDITIONAL INFORMATION STEP 2: WEARING THE N1 (CONTINUED) Adjust each earpiece until it fits flush in your ear and the eartip seals the ear canal.
6 ADDITIONAL INFORMATION STEP 2: WEARING THE N1 (CONTINUED) When not in use, clip earphones together using built-in magnets.
6 ADDITIONAL INFORMATION STEP 3. PAIRING WITH OTHER DEVICES The N1 can be used as a headset when connected to phones and tablets. It will first need to be paired with each device by following the procedure below: Press and hold the Multifunction button for about 7 seconds until you hear the headset say “Pairing” and the light flashes red and blue.
6 ADDITIONAL INFORMATION STEP 3. PAIRING WITH OTHER DEVICES (CONTINUED) Open the Bluetooth menu on the device you wish to pair (usually located in Settings > Bluetooth). If needed, select “search for devices”, “add new device”, or “refresh”. AT&T LTE Settings Bluetooth Devices Searching...
6 ADDITIONAL INFORMATION STEP 3. PAIRING WITH OTHER DEVICES (CONTINUED) Select “MEE audio N1” and allow pairing to complete. Use “0000” if a pin is required. Visit the Bluetooth Support Page at MEEaudio.com/Bluetooth for additional Bluetooth pairing and setup information. Note: Once paired, N1 will automatically reconnect to the paired deviceAT&T each time it is powered on.
6 ADDITIONAL INFORMATION CONTROLS WITH PHONES AND TABLETS Volume Up / Skip Track button [TAP] - Increase Volume [HOLD 2 sec] - Next Track Multifunction button [HOLD 3 sec] - Power On [TAP] - Play / Pause (during media playback*) [TAP] - Answer Incoming Call / End Call [HOLD 2 sec] - Reject Incoming Call [DOUBLE TAP] - Redial** [HOLD 2 sec] - Activate Siri® / Voice Command** [HOLD 3 sec] - Power Off Volume Down / Previous Track button [TAP] - Decrease Volume [HOLD 2 sec] - Previous Track [HOLD 2 sec] - Mu
6 ADDITIONAL INFORMATION PAIRING A HEADPHONE This procedure is used to pair an additional headphone or speaker with the Connect, or to re-pair the N1. Make sure your Bluetooth headphone or speaker is turned off. Put it in pairing mode. Consult the user manual of the headphone or speaker if you are not sure how to enter pairing mode.
SAFETY AND CARE • Battery performance will be severely decreased when stored in extreme temperatures: below -10°C/14°F or above 45°C/113°F including direct sunlight. • The lifetime of the battery will be significantly reduced if your device is not charged for a long time. It is recommended to charge your device at least once a month. • Clean with a soft, slightly damp cloth. Do not use chemical cleaners. • There are no user replaceable/reparable parts in this device.
WARNING Using headphones at high to moderate volumes for extended periods of time will result in permanent hearing damage. It is advised you keep volume levels moderate to low at all times for your safety. Do not use while driving a car, cycling, operating machinery, or performing other activities that require hearing surrounding sounds. Keep the device and packaging out of reach of children. WARRANTY MEE audio products purchased from authorized resellers are covered by a 1-year manufacturer warranty.
QUESTIONS? WE’RE HERE TO HELP! Phone Support: 626-965-1008 x31 Monday ~ Friday 9am to 5:30pm PST Email Support: support@MEEaudio.
