User Manual

ManualsBrandsMEE audio ManualsAudioConnect T1CMA Wireless TV Headphone System with Over-the-Ear Headphones and Bluetooth Audio Transmitter - Black

Plug the micro-USB

power cable into

the micro-USB

POWER port of the

Connect

Plug the USB end

of the cable into an

AC adapter, TV, or

computer USB port.

Slide the ON/OFF switch of the

Connect

transmitter to the ON position.

Remove protective caps

from both ends of the

digital optical S/PDIF

audio cable

Plug digital optical

S/PDIF audio cable

into the OPTICAL

audio input of

the

Connect

Plug the other end into

the TV’s DIGITAL AUDIO

OUT (OPTICAL) port.

Plug 3.5 mm audio cable into the

3.5 mm audio input of the

Connect

Plug the other

end into the TV’s

headphone jack.

Headphone jack may be located on

rear, side, front, or bottom of TV.

ADJUSTING VOLUME

Choose

ONLY ONE

audio cable supported by your TV

STEP 2 STEP 3

STEP 1

STEP 4

SUBSEQUENT USE

A OFF ON

Slide the ON/OFF switch of the

Matrix

Cinema

headphones to the ON position.

POWER ON AND CONNECT

CHOICE A: OPTICAL CHOICE B: 3.5 MM

CHOICE C: RCA

GETTING STARTED

CHARGE HEADPHONES

Proceed to

Plug the micro-USB

power cable into

the micro-USB

power port of the

Matrix Cinema

Plug the USB end

of the cable into an

AC adapter, TV, or

computer USB port.

OR OR

OPTICAL

DIGITAL AUDIO OUT

Plug red/white ends of RCA audio cable

into the TV’s red/white RCA AUDIO OUT

port.

Plug 3.5 mm end of RCA audio cable into

the 3.5 mm audio input of the

Connect

Change audio output settings to “VARIABLE”.

Set TV’s internal speakers to “OFF”.

**Exact menu and item names may vary

between TVs.

AUDIO OUT

R L

settings

sound / audio

Analog audio out

fixed

variable

settings

sound / audio

tv speakers

off

STEP 2

Proceed to

STEP 3

A solid blue light will appear on the

transmitter to indicate that a connection

is established

Test for sound. Make sure the volume on both

your TV and headphones is turned up.

Proceed to

STEP 4

Proceed to

STEP 4

Change Sound Output to “Optical”**

Change Digital Audio Output Format to

“STEREO” or “PCM”**

†

This may also need to done in the audio

output settings menu(s) of your streaming

app(s) and/or device(s) such as Apple TV

**Exact menu and item names may vary

between TVs.

†

On some TVs settings may be located in

“Advanced settings” or “Expert settings”

submenus.

settings

expert settings

Audio Output format

auto

dolby digital

pcm / stereo

DTS

settings

Sound / Audio

sound Output

hdmi

optical

tv speaker

NO SOUND? CHECK YOUR TV SETTINGS.

Note: If no solid blue light appears,

perform the pairing procedure in the

PAIR NEW/ADDITIONAL BLUETOOTH HEADPHONES

section on the reverse side of this page.

Proceed to

STEP 4

Test for sound. Make sure the volume on

both your TV and headphones is turned up.

Test for sound. Make sure the volume on

both your TV and headphones is turned up.

RCA jacks on TV must be designated

an AUDIO OUT. RCA input jacks,

commonly labeled AV IN, INPUT, or

COMP IN / COMPONENT will not work.

Proceed to

STEP 4

NO SOUND? CHECK YOUR TV SETTINGS.

Proceed to

STEP 4

When ready to use again, simply power on the

headphones and they will reconnect automatically

Do not put the

Connect

or your

headphones into pairing mode.

A solid blue light on the

Connect

will indicate that

a connection has been re-established.

COMPLETE ALL 4 STEPS. REMEMBER TO PLUG IN ONE POWER CABLE AND ONE AUDIO CABLE

NEED HELP?

VIEW OUR VIDEO SETUP GUIDE

Scan QR code or enter the URL

below into your web browser:

MEEaudio.com/T1CMAVid

RCA

audio cable

Digital optical S/PDIF

audio cable

2 x Micro-USB

power cables

MATRIX CINEMA

Bluetooth Stereo

Headphones

CONNECT

Bluetooth

Transmitter

3.5mm

audio cable

PACKAGE CONTENTS:

MATRIX CINEMA

A SOLID BLUE LIGHT ON TRANSMITTER

INDICATES CONNECTION

OFF

TAP

to increase

volume

TAP

to decrease

volume

Charge for 2 hours

hrs

The

Connect

transmitter and

Matrix Cinema

headphones are paired and ready to use and

will connect automatically once powered on.

OFF

Tap the Volume Up or Volume Down buttons on

the

Matrix Cinema

to adjust headphone volume

CHANGING AUDIO MODE

Tap the CinemaEAR button on the

Matrix Cinema

to enable CinemaEAR and to change the audio

mode. There are four audio modes available:

POWERING OFF

When finished listening, power off headphones

until next use.

The

Connect

transmitter can be left powered on

and plugged into USB power.

OFF

Clear Voice Mode

Boosts speech clarity to make dialogue easier

to hear over background sounds

Clear Voice Plus Mode

Additional enhancement to provide a greater

boost in speech clarity and intelligibility

Dynamic Music Mode

Improves bass and treble response to make

music sound more lively and exciting

Bass Boost Mode

Enhances bass response and depth to create

more impact and immersion with movies and

music

Hold the CinemaEAR button for 3 seconds to disable the

CinemaEAR audio enhancement feature.

OFF