User guide
52 • Uses For Your Meter’s Optional Functions Uses For Your Meter’s Optional Functions • 53
Marking Insulin Doses:
Some examples of how you may use
the Marking function to mark an
insulin dose are shown below.
•You may wish to mark a dose that
you are recording to indicate that you
entered the information at a different
time than you actually delivered the insulin.
• You may wish to indicate that a dose amount
was different than what you normally take at
that time.
Marked
Insulin Dose
(Example)
U
The labels P1, P2, P3, and P4 are used by your meter to identify up to
4 different types of insulin. As an insulin pump wearer you only use 1 type of
insulin. However, you may choose to use this feature to maintain a record of
those times when insulin injections were necessary. If you inject different
types of insulin you can label them. Keep a record of the labels you have
chosen for each insulin type.
The chart below shows examples of labeling
up to 4 different types of insulin.
*
Humalog is a trademark of Eli Lilly and Company.
Example 1:
Uses 1 insulin
type only
P1 __________
P2 __________
P3 __________
P4 __________
Example 2:
Uses 2 insulin
types
P1 __________
P2 __________
P3 __________
P4 __________
Example 3:
Uses 3 insulin
types
P1 __________
P2 __________
P3 __________
P4 __________
Example 4:
Uses 4 insulin
types
P1 __________
P2 __________
P3 __________
P4 __________
Regular NPH
Humalog
*
NPH
Humalog
*
Regular
NPH
Humalog
*
Regular
70/30
Labeling Your
Insulin Types