User guide

Uses For Your Meter’s Optional Functions • 51
50 • Uses For Your Meter’s Optional Functions
6. To save the insulin dose, press the
Mode button briefly, or press the
Insulin Recording button. A long
beep sounds to confirm that the insulin dose
was saved. (Refer to page 51 for marking your
insulin dose.)
7. If you inject more than one type of
insulin at one time, turn off the meter by
pressing and holding the Mode button.
Repeat steps 2 through 6
to record your next insulin type.
8. You have finished recording your insulin
information. To turn off your meter,
press and hold the Mode button
until the meter turns off, OR the
meter will turn off automatically
after 1 minute.
NOTE: It is recommended that you record your insulin within
10 minutes after delivery to make sure it is recorded with the
correct date and time.
Marking an
Insulin Dose
An insulin dose can be marked after an injection is recorded. For an
explanation of situations in which you may wish to mark an insulin dose,
refer to page 52.
1. Record your insulin dose. (Refer to page
48 for how to record your insulin doses.)
2. After you press the Mode button
briefly or press the Insulin Recording
button, a long beep sounds to confirm
that the insulin dose was saved.
3. To mark your insulin dose, press the
right or left arrow button.
An asterisk (
*
) appears, to confirm
that the dose is marked. Marking
is complete.
4. To turn off the meter, press and hold
the Mode button until the meter
turns off, OR the meter will turn off
automatically after 1 minute.
Marked
Insulin Dose
(Example)
U