User guide

How to Use Your Meter’s Optional Functions • 4140 • How to Use Your Meter’s Optional Functions
11. Set Marking for Identification Function:
The Marking for Identification function is
preset to “ .” Press the
right or
left
arrow button to select the
setting (“ ” or “ ”). Press the
Mode button briefly to confirm your
choice and to advance to end of setup.
12. End of Setup:
Optional Function Setup is complete. The
word “ ” will be displayed on your
meter.
13. Return to Setup:
Press the Mode button
briefly
to return to start of setup. You will see
“” and the word
“” or “ ,”
indicating whether you set the Insulin Pump
Glucose Transfer function to on or off.
14. Turn Off Meter:
Press and hold the Mode button until
the meter turns off, OR the meter will turn
off automatically after 1 minute.
Set Marking
Function
End of Optional
Function Setup
Reviewing Your
Optional Functions
1. Press the Mode button briefly
to turn the meter on.
2. Your Most Recent Blood Glucose Test Result
with date and time of testing is shown on the
display. (To set the correct date and time, refer
to page 10.)
Meter is off, with no test strip inserted in the test strip slot.
Most Recent
Glucose Reading
(Example)
PM
Mem.
mg/dL
3. If you wish to review up to 30 stored
test results, continue to press the
left arrow button. “ ” is displayed
after the last recorded test result. To return to
your most recent test result, press the left
arrow button.
4. Press the Mode button briefly
to advance to the next function.
If you have set the Insulin Recording function
to “ ,” proceed to next step.
If you have not set the Insulin Recording
function, skip to step 8.
End of Stored
Test Results
Mem.