User guide

How to Use Your Meter’s Optional Functions • 37
36 • How to Use Your Meter’s Optional Functions
1. Begin Setup:
Press and continue to hold the Mode
button. You will hear 2 short beeps
and see “ ” and the word “ .”
Release the Mode button.
Meter is off, with no test strip inserted in the test strip slot.
NOTE: If you release the Mode button too soon, turn off your
meter by pressing and holding the Mode button. Repeat step 1.
Glucose Test Result
Transfers to
Insulin Pump
Glucose Test Result
Transfers to
Insulin Pump
Setting the Optional
Functions
(Continued on next page.)
2. Set Glucose Test Result
Transfer To Insulin Pump:
The Glucose Test Result Transfer to
Insulin Pump is preset to “ .” Press
the right or left arrow button
to select the setting (
“” or “ ”).
3. Press the Mode button briefly to
confirm your choice and to advance
to set Insulin Recording function.
How to Use Your Meter’s
Optional Functions
Your Paradigm Link
TM
Blood Glucose Monitor has Optional functions that can
help you and your healthcare professional manage your diabetes.
The Optional functions allow you to:
1. Turn on or off sending blood glucose results to your Paradigm
®
Model 512
or higher Insulin Pump.
2. Mark specific blood glucose test results and insulin doses
3. Look at the 7-day average of your blood glucose test results
4. View time-specific averages of your blood glucose test results
5. Record and review your insulin doses
NOTE: The Optional functions are included with your meter.
These functions are turned off, except “ ”, when you receive
your new meter and must be manually set up. (Refer to page 37
for setup.)