User guide

How to Test Your Blood Glucose • 33

32 • How to Test Your Blood Glucose

A blood glucose test can be marked for identification after completing a test.

For an explanation of situations in which you may wish to mark a blood

glucose test, refer to page 31.

1. Test your blood glucose.

(Refer to page 22 for how to test.)

2. After a blood drop is applied to the

test strip, the display counts down from

5 seconds and shows your test result.

3. To mark your test result, press the

right or left arrow button. An

asterisk (

) appears, to confirm that the test

result is marked. To unmark the test result,

press the right or left arrow button

until the asterisk disappears.

Marked Blood Glucose

Test Result (Example)

Marking a Blood Glucose Test

For Identification

mg/dL

Blood Glucose Test

Result (Example)

(Continued on next page.)

4. To save the marked test result, press the

Mode button.

5. The marked test result is stored in the

meter’s memory.

6. To turn off the meter, press and hold the

Mode button until the meter turns off,

OR the meter will turn off automatically

after 1 minute.

NOTE:

Once a marked test result or manually entered insulin

dose is saved, you cannot unmark. Marked tests are not included

in averages. Results that are marked for identification are still sent

to the pump.