User guide

When suspended, your pump is in Attention mode with a solid circle showing on the pump. When in
Suspend, you can only resume your basal or view the STATUS screen. No other functions are available.
ಗ
To suspend the pump:
1
ಘ
Select Suspend from the MAIN MENU, and press ACT.
Main > Suspend
2
ಘ
SUSPEND will flash on your screen. Press ACT to stop your pump.
3
ಘ
The screen will show that the pump is suspended and the time that it stopped. After less than one minute,
the pump will return to the HOME screen with a solid circle.
You can verify on your pump STATUS screen that your pump is suspended.
Resume pump delivery
When the pump is suspended, it defaults to the HOME screen with a solid circle.
ಗ
To resume your pump and basal delivery, do these steps:
1
ಘ
From any screen, press ACT until the RESUME screen appears. Press
ACT again.
ಘ
2
ಘ
Your pump will beep once, then the HOME screen will appear without the solid circle.
NOTE: A bolus or fixed prime that was stopped by suspend will not restart when you resume your pump.
You must reprogram and activate it to finish delivery.
ಘ
Basic programming
56