User guide

Optimizing pump therapy 79
5 The SQUARE DURATION screen will appear. Enter the amount of time you want
the Square Wave bolus to last and press ACT.
NOTE - If you have BG Reminder turned on, a screen displays allowing you
to accept or modify the length of time after this bolus before you are
reminded to check your BG.
6 The BOLUS DELIVERY screen will appear. The pump will beep or vibrate at the start and end of the
bolus. During bolus delivery, the pump will return to the HOME screen. An open circle will appear
indicating that your pump is in Special mode.
For a Square Wave bolus do these steps: For a Dual Wave bolus do these steps:
a. Select Square Wave Bolus. Press ACT.
The SET SQUARE BOLUS screen will appear.
b. Enter the desired amount
for the Square Wave
bolus units and press
ACT.
c. Continue to step 5.
a. Select Dual Wave Bolus and press ACT. The
SET DUAL BOLUS TOTAL screen will appear.
b. Enter the desired amount
for the total dual bolus
units. Press ACT.
NOTE - The number of units you enter for
the SET DUAL BOLUS TOTAL is a total of
both the Normal and Square Wave bolus
units.
c. In the next screen, press
/ to change the
normal (Now) and Square
portions of the Dual Wave
bolus. Notice the screen
also shows the percentage
amount for each portion. Press ACT.
d. Continue to step 5.
SET SQUARE BOLUS
1.2U
SET DUAL BOLUS TOTAL
1.2U
0.6U
0.6U
Now:
50%
Square:
50%
ACT
SQUARE DURATION
Sq: 1.2U
0:30