User guide

Using the Bolus Wizard feature 71
Normal bolus using Bolus Wizard feature
After the Bolus Wizard feature is turned on and programmed, this feature can calculate an
estimate of insulin you need for your correction bolus and/or your food bolus. You have the option of
using the estimate or changing it as necessary. Additionally, your pump can receive your BG reading
from the meter, if they are linked.
Use to deliver a Normal bolus at any time except during another Normal bolus. A Normal bolus
will temporarily interrupt a Square Wave or Dual Wave bolus that is delivering. After the Normal
bolus is finished, the Square Wave or Dual Wave bolus delivery will resume.
NOTE - If you want to use the pump-to-meter link, make sure the meter option is on. Refer to the
section “Meter option” for instructions.
1 If you want a correction bolus, check your BG with your BG meter and go to step 2. If you want to
bolus for food, go to step 2.
2 Press on your pump, or go to the BOLUS MENU, select Use Bolus Wizard, and press ACT.
3 The ENTER BG screen will appear.
If you are NOT using a linked meter: If you are using a linked meter:
Enter your BG value. Press ACT and continue to
step 4.
If you are not entering a BG
and want to bolus for food,
select the dashes in the
ENTER BG screen. Press ACT
and continue to step 4.
NOTE - Selecting dashes in this screen will
make the Bolus Wizard feature calculate
the insulin needed for your food entry
without considering your BG level.
The meter reading will flash
on the pump screen. Press
ACT to accept this amount.
(You can change this BG
value, if necessary.)
Continue to step 4.
NOTE - You must program your bolus within 12
minutes of the pump receiving the reading from
the meter. If more than 12 minutes have
passed, the reading will no longer be available
from the screen and you must enter your BG
manually.
- - -
ENTER BG
mg/dL*
* or mmol/L
XXX
* or mmol/L
ENTER BG
Meter
mg/dL*