User guide

68 Chapter 5
Review your Bolus Wizard feature settings
Check your Bolus Wizard feature settings in the REVIEW SETTINGS screen. If necessary, compare this
information with your information in the Bolus Wizard feature settings table.
Bolus > Bolus Wizard Setup > Review Settings
1 In the REVIEW SETTINGS screen, scroll through the text
to view your Bolus Wizard settings.
2 Exit the menus when you are done.
Meter option
You can set up your pump to automatically receive
your BG reading from a linked meter. This meter may
have been included with your pump and may not be
available in all countries. Check with your local
Medtronic MiniMed representative. Your pump is set at
the factory with the meter option turned off.
Programming your meter ID links your pump to the
meter. If you do not “link” the meter to your pump,
you will enter your BG readings manually. Each meter
has its own unique ID. You can link up to three (3)
meters to your pump.
When the pump is idle (at the HOME screen), it will beep or vibrate when it receives a BG reading
from the meter. The reading will appear on the pump screen.
NOTE - The use of RF (radio frequency) devices with the pump reduces pump battery life.
You have to turn on the meter option to add, delete or review the meter ID(s) programmed in your
pump. The ID is the serial number printed on the back of the meter. See the user guide that came
with your meter for detailed information on how to use it.
ACT
WIZARD SETUP
Edit Settings
Review Settings
REVIEW SETTINGS
Wizard
On
Carb Units:
grams
Carb Ratios:
12:00A
6:00A
15
10
BG Units:
mg/dL
Sensitivity:
12:00A
30
6:00A
35
BG Target:
12:00A
90-120
6:00A
100-140
Active Ins Time:
6
BG
Readings
Pump
Linked
Meter