User guide

Using the Bolus Wizard feature 67
Active insulin time
The active insulin time setting lets the pump know which active insulin time to use in calculating
the amount of active insulin to subtract before estimating a bolus. Refer to “About active insulin” on
page 60 for more information about this setting.
Your healthcare professional should determine the active insulin time that is best for you. To set
the time, take the following steps:
Message What it means
➠ “Bolus Wizard setup is complete” ... Bolus Wizard feature is on and all settings are programmed.
➠ “Bolus Wizard is off”................... Bolus Wizard feature is off.
➠ “Missing Info” ........................... Bolus Wizard feature is on, but some of the settings are not
programmed.
This screen will show instructions and the missing
information.
You must program the missing information before you can
use the Bolus Wizard feature.
1 In the EDIT SETTINGS
screen, select Active
Ins Time
and press
ACT.
2 Set the number of hours for
the active insulin time and
press ACT.
3 The screen will return to
the EDIT SETTINGS screen
where you can see the
new setting.
- - -
->
->
EDIT SETTINGS
Sensitivity:
BG Target:
Active Ins Time:
6
(flashing) set, then
press ACT
ACTIVE INS TIME
hr
->
->
EDIT SETTINGS
Sensitivity:
BG Target:
Active Ins Time:
6