User guide

66 Chapter 5
1 In the EDIT SETTINGS screen, select BG
Target and press ACT.
2 Enter the low end of your BG target range
and press ACT.Then enter the high end of
your BG target range and press ACT.
NOTE - The start time for your first BG target range is midnight (12:00A or 00:00) and cannot
be changed.
3 The screen will display one of these messages:
4 To set just one BG Target:
To set more than one BG Target:
a. Press ESC. a. Set the start time for
the next BG target
range and press ACT.
b. Set the low and high
values for the next BG
target range and
press ACT.
c. Repeat steps a and b
to set more BG target
ranges.
d. Press ESC when you
are done.
->
- - -
first
BG Target
Range
(flashing)
mg/dL
100 - 100
EDIT SETTINGS
BG Units:
mg/dL
Sensitivity:
BG Target:
ACT
TARGET RANGE 1
12:00A
_ : _
(flashing)
press ESC
_ - _
SET START TIME 2
mg/dL
_ : _
(flashing) set, then press
ACT
SET START TIME 2*
_ - _
mg/dL
_ : _
(flashing) set, then press
ACT
*Depending on how many
targets you set, this number
can be 2 through 8.
mg/dL
100 - 100
TARGET RANGE 2*