User guide

Basic programming 39
Resume pump delivery
When the pump is suspended, it defaults to the HOME screen with a solid circle.
Do these steps to resume your pump and basal delivery:
1. From any screen, press ACT until the RESUME screen appears. Press
ACT again.
2. Your pump will beep once, then the HOME screen will appear (with no
circle).
NOTE - A bolus or fixed prime that was stopped by Suspend will NOT
restart when you resume your pump. You must reprogram and activate
it to finish delivery.
WARNING: Make sure you are NOT connected to your pump while practicing.
Practice:
Resume basal delivery after a suspend
Make sure you are NOT connected to your pump while practicing.
Give a 3.0 unit bolus now. While it is delivering, suspend the bolus.
Check here if you were able to suspend the bolus.
Now restart the pump.
Check here if you were able to restart the pump.
Stopped at 1:05P
RESUME
ACT - Restart Basal
ACT
ACT