User guide

Basic programming 33
If you need to program more than one basal rate for the day, do these steps:
a. In the SET START TIME 2 screen, enter the
start time for the next rate and press ACT.
b. The SET BASAL RATE 2 screen will appear.
Enter the rate and press ACT.
c. Repeat steps a and b for each additional
basal rate. Each rate will have a different
number (i.e. Basal Rate 1, Rate 2, Rate 3,
etc.).
d. After you program your last basal rate,
press ESC.
e. The BASAL RATE screen will appear. Your basal rate(s) will now
deliver as programmed. Exit the menus.
NOTE - When you have finished programming your pump, you can save your
settings. Refer to “User settings” on page 117 for instructions.
WARNING: Make sure you are NOT connected to your pump while practicing.
Practice: Basal programming
Make sure you are NOT connected to your pump while practicing.
Set a basal rate of 0.5 unit per hour.
Check here if you were able to set the basal rate:
What is the total basal insulin for 24-hours? ______ (answer: 12 units)
Start time 2 (flashing)
Press
/ to set
Rate 2 (flashing)
Press
/
to set
SET START TIME 2
- - : - -
_ . _ _
SET BASAL RATE 2
7:30A
_. _ _
ACT
ACT
U
H
U
H
SET START TIME 3
- - : - -
_. _ _
BASAL RATE
Current Rate
Started #1 -
24 Hr. Total
0.60U/H
12:00A
14.40U
ESC
U
H